Homepage Products Export Feedback Contact us
Location : Products >>REFRACTORY MATERIAL >> Magnesite Sinter
 
High-Purity Magnesite Sinter

The raw material of high-purity magnesite is selected from natural super grade siderite,and is made through the processes of hte floatation,purity,fine-grinding,briquetting and super high temperature for the brick making and the unshaped refractory material making.ALl equipments of the high-purity magnesite making are introduced from abroad.

Brand
Physical and chemical indices
Size(mm)
MgO% ¡Ý
SiO2%¡Ü
CaO%¡Ü
Fe2O3%¡Ü
IgL%¡Ü
B.D¡Ý( g/cm3)
0-30
MS-98
97.7
0.5
1.2
0.5
0.3
3.30
MS-97a
97.5
0.6
1.2
0.7
0.3
3.30
MS-97b
97
0.7
1.4
0.8
0.3
3.25
MS-96
96
1.0
1.4
0.8
0.3
3.25

Middle-Grade Magnesite Sinter

Middle-Grade mangnesite sinter is made from caustic calined magnesite which content 97% MgO,through the processes of briquetting and sintering.The products sintering level good and crystal compact.It is a good material for making magnessian shaped products.
Grade
Physical and chemical indices
Size(mm)
MgO% ¡Ý
SiO2%¡Ü
CaO%¡Ü
Fe2O3%¡Ü
Al2O3%¡Ü
IgL%¡Ü
B.D¡Ý( g/cm3)
MS-95
95
2.0%
1.6
1.0
1.0
0.3
3.20
0-30
MS-94
94
2.5%
1.6
1.1
1.0
0.3
3.20
0-60

Dead-Burned Magnesite Sinter

Dead-burned magnesite is selected from natural magnesite,it is produced by mine-selecting,purifing,calcining in shaft kiln.It is an ideal material for unshaped refractory material,the final products are used in open hearth frunace,eletric furnace bottom and furnace's lining tamping.
Brand
Physical and chemical indices
Size(mm)
MgO% ¡Ý
SiO2%¡Ü
CaO%¡Ü
IgL%¡Ü
B.D¡Ý( g/cm3)
MS-92
92
3.5
1.6
0.3
3.18
all kind sizes
MS-91
91
4.0
1.6
0.3
3.20
MS-90
90
4.5
1.6
0.3
3.18
MS-89
89
4.8
2.0
0.5
3.15
MS-88
88
4.8
5.0
0.5
-
MS-87
87
7.0
2.0
0.5
-

Electro-Fused Magnesite Sinter
The-material of electro-fused magnesia sinter is selected from special grade A natural magnesite or high-purity caustic calcined magnesite,which is fused in arc furnace to finish the products.The products possess high purity,big crxstalline grain and compact texture,have high heat-vibration steady and cinder corrosion resistant.It is used for making high quality magnesite bricks,magnesia-carbon bricks and unshaped refractory materals.
Specification of Electro-Fused Magnesia Sinter
Brand
Physical and chemical indices
Size(mm)
MgO% ¡Ý
SiO2%¡Ü
CaO%¡Ü
Fe2O3%¡Ü
IgL%¡Ü
B.D¡Ý( g/cm3)
0-30
0-120
DMS-98
98
0.45
1.0
0.5
0.2
3.50
DMS-97a
97.5
0.55
1.2
0.7
0.3
3.50
DMS-97b
97
0.6
1.2
0.8
0.3
3.50
DMS-96
96
1.2
1.4
1.0
0.4
3.40

Large Crystal Electro-Fused Magnesia Sinter
Brand
Physical and chemical indices
Size(mm)
MgO% ¡Ý
SiO2%¡Ü
CaO%¡Ü
Fe2O3%¡Ü
Al2O3%¡Ü
IgL%¡Ü
B.D¡Ý( g/cm3)
Large crystal -99
99.0
0.15
0.40
0.25
0.10
0.10
3.50
0-30
0-60
Large crystal -98.5
98.5
0.30
0.70
0.30
0.15
0.10
3.50
Large crystal -98
98.0
0.35
1.00
0.40
0.20
0.10
3.50
Large crystal -97.8
97.8
0.40
1.00
0.50
0.20
0.10
3.50
Large crystal -97.5
97.5
0.50
1.00
0.55
0.20
0.15
3.50
Large crystal -97
97.0
0.60
1.20
0.70
0.20
0.20
3.50

Electro-Fused Magnesia-Chrome Sinter
The raw material of the fused magnesia-chrome siner is selectd from high quality caustic calcined Magnesite powder and high-purity chromite,through mixing,pressing pellet,and fusing in arc furnace to finish the products.It possesses high direct binding rate¡¢high purity and large crystalline grain.It is used for making high quality magnesite chrome brick.

Brand
Physical and chemical indices
Size(mm)
MgO% ¡Ý
SiO2%¡Ü
CaO%¡Ü
Fe2O3%¡Ü
Cr2O3%¡Ü
B.D¡Ý( g/cm3)
DMGS15A
70
1.0
1.0
7
15
3.70
0-30
0-60
0-120
DMGS15B
70
1.5
1.5
10
15
3.70
DMGS20
40
1.0
1.0
15
20
3.80
DMGS25
36
1.0
1.0
17
25
3.9


| Homepage | Products| Export | Feedback | Contact us |
 

Please use IE5.0 or above and 1024*768px to view this site!

Copyright© calbex 2003 all rights reserved
E-mail:sales@calbex.com