BONDED ABRASIVES

Location : Products >>BONDED ABRASIVES >> Resinold Bonded Wheels Series

Marking

Abrasives	Grit			Grade			Resinoid Bond	Reinfoced with fibre glass
Abrasives	Coarse	medium	fine	medium	medium hard	hard	Resinoid Bond	Reinfoced with fibre glass
A	20	30	70	M	P	S	B	F
WA	22	36	80	N	Q	T
ZA	24	46	90		R
C		54	100
GC		60	120
A/C			150
A/WA

Cutting on stationary machiness

Dia×Thic	Arbor					Max.R.P.M			Description					Pcs/Pkg
Dia×Thic	22.23	25.40	30.00	31.75	38.10	3800m/min	4300m/min	4800m/min	A30R	A30Q	C36S	BF1	BF2	Pcs/Pkg
250×3.2			-	-	-	4800	5400	6100		-			-	25
250×4.0			-	-	-	4800	5400	6100		-				25
300×3.2	-				-	4000	4500	5100						25
300×4.0	-				-	4000	4500	5100						25
350×3.2	-				-	3400	3800	4400						25
350×4.0	-				-	3400	3800	4400						25
400×3.2	-				-	3000	3400	3800						25
400×4.0	-				-	3000	3400	3800						25
450×3.2	-				-	2700	3000	3400						25
450×4.0	-				-	2700	3000	3400						25
500×5.0						2400	2700	3100						25
600×6.0						2000	2200	2600						25

()Also standard hole 32mm and 40mm on request

A30R General purpose application on mild and low hardness steel,cast-iron profiles,pipes,metal sheets.Good cutting speed and long life.

A30Q High alloy and stainless steel,hard cast-iron,special alloys,fast cutting speed and long life.

C36S General tiles,semi hard stones,concrete,masonry,refractories,plastic,cast-iron.good cutting speed and long life.

Cutting on portable machines with cut-off wheels

DiaThic×Arbor	Max.R.P.M			Description							Pcs/Pkg
DiaThic×Arbor	3800m/min	4300m/min	4800m/min	A30S	A36S	A36N	A30N	C30S	BF1	BF2	Pcs/Pkg
100×2.5×16	1200	13800	15300		-	-	-			-	25
115×2.0×22	10500	11600	13300			-	-	-	-		25
115×2.5×22	10500	11600	13300		-	-				-	25
125×2.0×22	9600	10700	12200	-		-	-	-	-		25
125×2.5×22	9600	10700	12200		-	-				-	25
150×2.0×22	8000	8900	10200	-		-	-	-	-		25
150×2.5×22	8000	8900	10200		-	-	-			-	25
180×2.0×22	6700	7400	8500	-		-	-	-	-		25
180×2.5×22	6700	7400	8500		-					-	25
230×2.0×22	5200	5800	6600	-		-		-	-		25
230×2.5×22	5200	5800	6600		-					-	25
300×2.0×22	4000	4500	5100		-	-			-		25
300×2.5×22	3400	3800	4400		-	-			-		25

（

）Also standard hole 20mm and 25.4mm-Speed 100m/sec.

A30S Mild steel,low alloy steel,metal sheets,pipes,profiles,general purpose,good cutting speed and long life.

A36S Thin cut-off wheels for general purpose on mild,low and medium alloy steel,small sections,metal sheets,profiles,boxes,fast and cool cutting,good side finish.

A36N High alloy and stainless steel,low iron and sulphur content.Recommended for rust-free application,fast and cool cutting,long life.

A30N Aluminium and non ferrous metals.Fast cutting and free from loading discs.

C30S General purpose application on masonry,concrete and other building materials,refractories,marbles and stone,etc.

Special cut-off wheels for low power chop saws.

Dia×Thic×Arbor	Max.R.P.M			Description				Pcs/Pkg
Dia×Thic×Arbor	3800m/min	4300m/min	4800m/min	A36N	A46S	BF1	BF2	Pcs/Pkg
250×2.4×25.4	4800	5400	6100	-		-		25
250×2.8×25.4	4800	5400	6100		-		-	25
300×2.4×25.4	4000	4500	5100	-		-		25
300×2.8×25.4	4000	4500	5100		-		-	25
350×2.4×25.4	3400	3800	4400	-		-		25
350×2.8×25.4	3400	3800	4400		-		-	25

A36N general purpose A46S general purpose

Cutting on small pneumatic & electrical tools

Dia×Thic×Arbor	Max.R.P.M			Description				Pcs/Pkg
Dia×Thic×Arbor	3800m/min	4300m/min	4800m/min	A46T	A36S	BF1	BF2	Pcs/Pkg
50×1.6×10	24800	27600	31500		-	-		100
65×2.0×10	19200	21400	24400		-	-		100
76×2.0×10	16000	17800	20300	-		-		100
80×2.0×10	15100	16800	16200	-		-		100
100×2.0×10	1200	13400	15300	-				100

A46Tgeneral purpose A36S general purpose

Cutting on portable machines with depressed center wheels.

Dia×Thic×Arbor	Max.R.P.M			Description							Pcs/Pkg
Dia×Thic×Arbor	3800m/min	4300m/min	4800m/min	A30S	A36S	A36N	A30N	C30S	BF1	BF2	Pcs/Pkg
76×2.5×10	16000	17800	20400	-		-	-		-		50
100×2.5×16	12000	13400	15300	-		-	-			-	50
100×3.2×16	12000	13400	15300		-	-	-		-		50
115×2.5×22	10500	11600	13300	-		-	-			-	50
115×3.2×22	10500	11600	13300		-				-		50
125×2.5×22	9600	10700	12200	-		-	-			-	50
125×3.2×22	9600	10700	12200		-				-		50
150×3.2×22	8000	8900	10200		-	-	-			-	50
180×2.2×22	6700	7400	8500	-		-	-		-		25
180×3.2×22	6700	7400	8500		-					-	25
230×2.5×22	5200	5800	6600	-		-	-		-		25
230×3.2×22	5200	5800	6600		-					-	25

A30S Mild steel,low alloy steel,metal sheets,pipes,profiles,general purpose,good cutting speed and long life.

A36S Thin cut-off wheel for general prupose on mild,low and medium alloy steel,small sections,metal sheets,profiles,boxes..fast and cool cutting,good side finish.

A36N High alloy and stainless steel.low iron and surphur content.Recommended for rust-free application.Fast and cool cutting long life.

A30N Aluminium and non ferrous metals.fast cutting and free from loading discs.

C30S General purpose application on masonry,concrete and other building materials,refractories,marble and stone.etc.

Snagging on portable machiness

Dia×Thic×Arbor	Max.R.P.M			Description											Pcs/Pkg
Dia×Thic×Arbor	3800m/min	4300m/min	4800m/min	A24N	A24R	A24S	A30P	A30N	ZA24R	C24R	BF1	BF2	BF3	BF4	Pcs/Pkg
76×4×10	16000	17800	20140	-		-	-	-	-			-	-	-	100
76×6×10	16000	17800	20140	-		-	-	-	-		-		-	-	50
100×4×16	12000	13400	15300	-		-	-	-	-				-	-	50
100×6×16	12000	13400	15300	-		-	-	-	-		-		-	-	50
115×4×22.2	10500	11600	13300	-		-	-	-	-			-	-	-	50
115×6×22.2	10500	11600	13300	-		-		-	-		-		-	-	50
125×4×22.2	9600	10700	12200	-		-	-	-	-			-	-	-	50
125×6×22.2	9600	10700	12200	-		-		-	-		-		-	-	50
150×6×22.2	8000	8900	10200	-		-	-	-	-	-	-		-	-	50
180×6×22.2	6700	7400	8500								-		-	-	25
180×8×22.2	6700	7400	8500	-		-	-	-			-	-		-	25
230×6×22.2	5200	5800	6600